导航

Forged valve

Forged valves

WINDMILL valve are available in three bonnet designs. The first design is the Bolted Bonnet,with male-female joint,spiral wound gasket,made in F304L/graphite,ring joint gasket are also available on request. The second design is the welded bonnet,with a threaded and seal welded joint. On request a full penetration strength welded joint is available. The third design is the pressure seal bonnet,with a threaded and pressure seal bonnet joint.

Forged valve

Globe valve Design Construction and Specifications

WINDMILL globe valves conform to API602,and ASME B 16.34
Each are tested according to API 598,and marking is per MSS SP-25

Construction is as follows

* Full Port or Conventional Port
* Outside Screw and Yoke(OS & Y)
* Two piece self-aligning packing gland
* Bolted bonnet with spiral wound gasket, threaded and seal welded bonnet or threaded and pressure seal bonnet
* Integral backseat
* Globe valve Loose solid disc
* Socket weld Ends to ASME B 16.11
* Screwed Ends (NPT) to ANSI/ASME B1.20.1

floating ball valve has better sealing and property than cast floating ball valve.Its better material property could make pipeline cut off or not with longer service. forged trunnion mounted trunnion ball valve have much better property than the casted specilized in high pressure.
 

Contact Now

If you have Forged valve any enquiry about quotation or cooperation, please feel free to email us at sale@dfcvalve.com or use the following enquiry form. WINDMILL sales representative will contact you within 24 hours. Thank you for your interest in our Forged valve products.

About US  |  Sitemap  |  Website Link  |  Job WINDMILL  |  Downloads  |  Gate valve  |  Contact US  |  E-Mail  |  Admin

Copyright 2009 WENZHOU WINDMILL VALVE CO.,LTD. Some Rights Reserved.

ADD:Qiaoxia,Wenzhou,Zhejiang,China   TEL:0086-577-67955569   FAX:0086-577-67955565   E-mail:sale@dfcvalve.com